Simulation and Analysis of Electromagnetic Force in Laser Melting Deposition by Electromagnetic Impact

Magnetic field was introduced in laser melting deposition to reduce the pores in workpieces.Finite 3-D model of the coil-deposition layer-substrate was established.Simulation results show that the electromagnetic force in deposition layer mainly concentrates in the projection area of the coil.Axial electromagnetic force shows repulsion in one cycle.The experimental results indicate that the magnetic field is beneficial for grain refinement,microhardness increasement and decline of quantities and average sizes of pores.     

Performance evaluation for MAP state estimate fusion

This paper presents a quantitative performance evaluation method for the maximum a posteriori (MAP) state estimate fusion algorithm. Under ideal conditions where data association is assumed to be perfect, it has been shown that the MAP or best linear unbiased estimate (BLUE) fusion formula provides the best linear minimum mean squared estimate (LMMSE) given local estimates under the linear Gaussian assumption for a static system. However, for a dynamic system where fusion is recursively performed by the fusion center on local estimates generated from local measurements, it is not obvious how the MAP algorithm will perform. In the past, several performance evaluation methods have been proposed for various fusion algorithms, including simple convex combination, cross-covariance combination, information matrix, and MAP fusion. However, not much has been done to quantify the steady state behavior of these fusion methods for a dynamic system. The goal of this work is to present analytical fusion performance results for MAP state estimate fusion without extensive Monte Carlo simulations, using an approach developed for steady state performance evaluation for track fusion. Two different communication strategies are considered: fusion with and without feedback to the sensors. Analytic curves for the steady state performance of the fusion algorithm for various communication patterns are presented under different operating conditions.     

ASP技术在军事信息网络中的运用

通过介绍ASP技术,提出了利用其开发可靠、安全的军事信息网络Web站点的一般方法,并给出了ASP对数据库操作所使用的SQL语法,同时,介绍了SSL加密的方法.     

自旋稳定卫星海上测控姿章联控及实现

介绍了同步轨道自旋稳定卫星海上姿态章动联合控制原理。通过分析等倾角进动过程,建立了理论与实际执行角、同步脉冲执行次数和时延的计算模型,并给出了姿章联控系统的组成及实现过程。     

一种用于FM-FM遥测系统的测试信号源

介绍一种满足IRIG标准的FM- FM 调频信号源。根据试验结果,证明这种信号源不仅性能稳定,而且具有很好的灵活性。在各类符合IRIG标准FM- FM 体制遥测接收机的研制中具有一定的实用价值     

中山植物园植物定植图微机显示与管理系统

首先指出利用微机管理植物园取代落后的手工管理的意义。进而介绍了植物定植图微机显示与管理系统的具体实现途径，并描述了能将地图（含充色地图）、植物、宇符等录入。绘出，以及对植物进行检索显示等主要功能。     

电解催化氧化法处理L—乳酸精制残留液的初步研究

电解催化氧化法能很好地降解高浓度有机废水中的有机污染物 ,是一种高级氧化技术。针对L—乳酸精制残留液CODcr值约高达 14 0 0 0 0mg L的特点 ,本文对电解催化氧化处理L—乳酸精制残留液进行了初步研究。结果表明 ,在直流电解电流密度为 2 80A m2 时 ,电解 12小时 ,并消解 5天 ,CODcr的去除率为 98.5 7% ,脱色率为 5 2 .77%。     

有机高分子絮凝剂处理高浊度原水效果和机理研究

本文研究了有机高分子絮凝剂ＰＡＭ、ＣＴＡＢ及它们的复配ＰＡＭ＋ＣＴＡＢ处理高浊度原水的最佳实验条件、絮凝性能、效果和机理，为有机高分子絮凝剂的选择和管式絮凝器的研制提供了理论依据。     

动态三角翼的非定常气动特性和压力分布相关研究

文章介绍了不同后掠角三角翼在进行俯仰振荡时的动态压力特性,说明这种动态压力特性同三角翼的法向力的变化是密切相关的,试验研究揭示了流态、压力和气动力之间的密切关系。同时试验研究显示三角翼上翼面压力的动态变化曲线呈现出双峰形态;不同后掠角三角翼在动态试验过程中压力、法向力都具有相似特性。